retaining screw वाक्य
उदाहरण वाक्य
मोबाइल
- If there are no retaining screws, simply lift the fixture off the bracket.
- If no retaining screw is visible, check the top of the faucet handle.
- Look for retaining screws holding the fixture to the bracket.
- The adjustable front sight could be lost if the retaining screw wasn't tightly secured.
- It commonly has a fixed front sight and a rear sight with no retaining screw.
- Removal then required first removing the socket cover, to allow this retaining screw to be removed.
- The top may be secured with retaining screws at the rear corners or near the lint trap.
- The main panel is usually held in place with retaining screws and two springs at the bottom corners.
- Position the anchor plate over the hole in the toggle flange and drive the retaining screw in place.
- If you find retaining screws, remove them and lift up on the fixture to slide it off the bracket.
- They often have an adjustable front sight with an Allen screw and a rear sight with a retaining screw.
- 1d 1939-41 ( August ) SN 125000-180000-Identifiable by the centre retaining screw being off-centre and not concealed by the lens-mount flange.
- The retaining screw is designed so the differential can be easily adjusted by tightening or loosening the screw, consequently changing force.
- It has two pieces _ a screw-in toggle that penetrates through the wall and a retaining screw that screws into the toggle.
- In conventional square design, optical components must be held at four points since the retaining screws must be placed on each side of the plates.
- Removing the retaining screw will release the tension and cause the spring to snap around, so maintain a grip on the metal tube and allow the spring to gently unwind.
- In 1896, at serial number 164, 100, a spring-loaded base pin latch replaced the cylinder pin retaining screw and by 1900, at serial number 192, 000, the Colt Single Action was certified for use with smokeless powder.
- Some handles are attached on both sides by screwing or sliding them directly onto the spindle, and then securing one or more retaining screws ( set screws ) through the knob perpendicular to the flat of the spindle.
- A thrust bearing ( or thrust race ), on the opposite side of the gear, is used to stop the differential from loosening the retaining screw holding the output cups, used to attach the differential to the axle, onto the differential.
retaining screw sentences in Hindi. What are the example sentences for retaining screw? retaining screw English meaning, translation, pronunciation, synonyms and example sentences are provided by Hindlish.com.